Tiles: Set Line View Min and/or Max Y-Axis



If you have a data point that is messing up the desired view range of your line graph (spark line), you can set the min and/or max y-axis by doing the following:

1. Right-click on the desired tile (or long press if you are using a touchscreen device).
2. If the Type is selected as "line", there will be a Y Axis Maximum and Y Axis Minimum field at the bottom of the tile configuration settings that pop-up. Type in the desired maximum and/or minimum value.
3. Click the close button to save your changes.

If you leave either the Y Axis Maximum or Minimum field blank, it will default to the max/min value in the entire data set for that 
signal (data stream).  

Feedback and Knowledge Base